>The content of the eeprom specifies everything about the
>module - size, bank format, timings etc.

Yeah, that is what I understood too.

>I think it's a JEDEC standard.
>There is some info on the Micron website - have a look
>at the datasheets of their SIMMs

OK, that is a good pointer, thanks for that.

>You would probably need to tweak the eeprom data if moving
>chips between SIMMs

Well I figured I should only need to tweak the module size, as they are
identical units from the same manufacturer.

>It's a standard I2C EEPROM - the addresses are set by the slot
>number so the ssytem can see what is in each physical slot.

and these particular ones are Microchip ones. I assume they are on the SMB
bus that also talks to the ATX power supplies.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist