I have the ' picreg.h' file and 'DEX.MAC' it can find these files I suspect
Matthew has identified the problem. 

Many thanks to all for your help.

Bob 


-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
Michael Rigby-Jones
Sent: 25 May 2005 18:23
To: Microcontroller discussion list - Public.
Subject: RE: [PIC] MPLAB Compile Errors



>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 25 May 2005 16:29
>To: piclist@mit.edu
>Subject: [PIC] MPLAB Compile Errors
>
>
> I came across an excellent bit of software for decoding 
>POCSAG using a 16C84 see attached file.   
>Unfortunately when I tried to compile it using MPLAB 7.10 it 
>gave over 100 errors?
>
>Any tips as to why so many errors should happen? I am new to 
>PIC programming but have looked everywhere for help.
>
>Thanks,
>
>Bob 
>
>PS Have also used MPASM 3.2 with the same result.


Do you have the "picreg.h" file which is included?

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist




-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist