I have more than 300 16lc924-4/pt, that are exchange with 
one surplus shop by 1800 24C02. I need 300 crystal
any way. On ebay, there is very cheap 6MHz crystal, 
100/2.99USD. Other source, cheapest is 0.5USD/piece.

I will test 16lc924, with 5.5V Vdd+6MHz. and hope it works.




----- Original Message ----- 
From: "Jan-Erik Soderholm" <jan-erik.soderholm@telia.com>
To: <piclist@mit.edu>
Sent: Wednesday, May 25, 2005 4:14 AM
Subject: RE: [PIC]6MHz crystal, for 4Mhz 16lc924, how big possibility?


> microsoftwarecontrol wrote :
> 
> > can't find good price for 4Mhz crystal, but see one sell 
> > for 6MHz crystal. 
> 
> You must be joking, right ?
> You need just one or a realy large batch ?
> 
> > I have been test 20Mhz f877a, to 24MHz, without problem.
> 
> How do you know it was "without problem" ? It might have
> *looked* like that, but you can't be sure.
> 
> > any one tried 4MHz pic under 6MHz crystal?
> 
> The possibility that a 4 Mhz PIC works with a 6 Mhz
> crystal "on the bench" is probably very close to 100%,
> but what does that say ?
> 
> Get a 4Mhz crystal (or resonator). Or a faster PIC...
> 
> B.t.w, the 16(L)C924 is on the "Mature" list, so maybe you
> should look for another PIC anyway.
> 
> Best Regards,
> Jan-Erik.
> 
> 
> 
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist