Well, that's certainly not the case with the 18F1320.  The pin had
worked perfect on all my other projects.  I think it just got confused
or something.  Works great now.

On 5/23/05, Josh <joshuajordan@adelphia.net> wrote:
> Dave Turner wrote:
> 
> >Hey
> >
> >I have got a very strange RA3 pin.  It is being used as an output,
> >with an LED connected.  I am using a PIC18F1320.  For some reason, the
> >LED on RA3 always stays off, but, and this is the strange part, when I
> >press the active low switch on RB0, the LED works normally.  I have
> >checked nothing in my code is referencing porta,3, and the hardware is
> >fine.  BTW, I'm using the PICDem 4 board, and a MPLAB ICD2 as a
> >programmer.
> >
> >--
> >
> >All us base are belong to you.
> >
> >
> >
> I had that same problem with the 16F676, I found out from the datasheet
> that RA3 happens to be input-only.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


-- 

Dave
All us base are belong to you.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist