peter@whacky-scientist.com wrote :

> OK , didnt check out the program before but there is a
> workaround
> 
> Build your program
> Press F11 (picflash programmer tool)
> click eeprom (bottom right hand)
> edit eeprom memory
> click save hex
> done
> 
> Peter

OK, Thanks. That seems to "work". But with a few drawbacks.
The above steps has to be re-done at each build.
The eeprom editor in pickflash only uses hex format.
When saving the HEX file, all eeprom is included even those
parts that are left un-programmed.

I'll see if the support know anything about it...

Jan-Erik.



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist