OK , didnt check out the program before but there is a
workaround

Build your program
Press F11 (picflash programmer tool)
click eeprom (bottom right hand)
edit eeprom memory
click save hex
done

Peter

--- Jan-Erik Soderholm <jan-erik.soderholm@telia.com>
wrote:
> Peter van Hoof wrote :
> 
> > user manual at 
> >
>
http://www.mikroe.com/pdf/mikropascal/mikropascal_manual.pdf
> > page 16:
> > "EEPROM Editor allows you to easily manage EEPROM
> of PIC 
> > microcontroller."
> > 
> > 
> > Peter van Hoof
> 
> Damn...
> I forgot to say,
> Yes, of course I have seen that part, but there is
> no EEPROM
> editor in the Tools menu. Is this only for some
> parts ? Or only
> in the non-demo version ? Or is there anything else
> special
> to do to get the EEPROM editor to work ?
> 
> Do you have an example of a device where it does
> work ?
> If so, I could compare the device config files to
> see if
> there is something missing (after all, the PWM parts
> was missing from the 12F683 file...)
> 
> Jan-Erik.
> 
> 
> 
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 
> 
> 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist