> Wouter van Ooijen wrote:
> > 2x5, 2.54mm pitch. Think PC HD connector, but less pins. see
> > http://www.voti.nl/dwarf/notes/DN001.pdf, page 4, pin assignment on
> > page 5.
>
> That looks reasonable enough.  I had figured that is someone wanted to
have
> I/O signals via a connector, they could solder a single row header to the
> prototype area.  However, the double row is more compact and providing a
> space for it keeps I/O from eating into the proto area.  I've put your
> connector on the board with 10 labeled pads coming out so that it can be
> hooked up any way someone wants.  I'm thinking this would not come
> installed, but the pads would be there.
>
>

How about adding a couple extra rows of holes in the normaly blank area
where the ICs would set on the prototype area - i.e. no gap. That would
allow someone to put any size double row header in to suit thier needs.

-Denny

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist