http://www.onepasinc.com/bonnie/smt/smt.html

A web search returned a reference to the onepas stuff on the sxlist.

-----Original Message-----
From: James Newtons Massmind <jamesnewton@massmind.org>
Sent: May 19, 2005 9:09 PM
To: "'Microcontroller discussion list - Public.'" <piclist@mit.edu>
Subject: RE: [PIC] PIC prototype board comments?

> ...but the board will cost more than usual due to the 
> large number of holes.


Anyone thought about doing LARGE surface mount as a way to keep bread
boarding cost down? 1206 are REALLY not hard to solder. Neither are any of
the SO... IC packages. And if you have an existing stock of through hole
parts, you can always just bend the pins under or out and solder them down.

Probably not going to happen, but I'd be interested in SMT bread boarding
systems... Not much available in that area.

---
James Newton, massmind.org Knowledge Archiver 
james@massmind.org 1-619-652-0593 fax:1-208-279-8767 
All the engineering secrets worth knowing:
http://techref.massmind.org What do YOU know?



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist