I have made two Wisp628 based programmers (one is using EasyISP firmware
and use Olin's picprog program. The other is using Wisp628 firmware
andXwisp2).
Both were working under Windows 98. Recently I have my computer upgraded to
Windows XP professional and now both are not working.
 
The error messages are copied here.

What could be wrong here? Is it because I only has user right (not
an administrator)?
 
Xiaofan

__________________________________________________
 C:\Myprog\wisp628\XWISP>xwisp2w com2 read test.hex
  XWisp2 version 1.5.03 (Sep 06 2004, Open Watcom C 1.30)
 SendReceiveSlow read timeout
 Failed to activate Wbus device
 XWisp2 failed after 1.05 seconds, rc 23!
 
 C:\embedinc\com>pic_read -sio 2 -pic 12F629 -hex test.hex
 No response was received from the programmer.  The programmer may be
powered
 off or not connected to COM2.
 Error occurred on attempt to open a new use of the PICPRG library.
 *** Program aborted on error. ***
 ______________________________
 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist