Tarun,

Thank you for your help.
I did it selecting the output device GERBER_RS274X, then executing the
Process Job button, a Warning appears telling me more than 1 signal
layer is active. It is all to get the gerber data?

Regards,

Augusto

-----Mensaje original-----
De: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] En nombre
de Tarun Grover
Enviado el: Mi=E9rcoles, 18 de Mayo de 2005 10:31 a.m.
Para: Microcontroller discussion list - Public.
Asunto: Re: [EE] How to generate gerber data files

Augusto,

What you need to do is to run your board through one of the cam
processors.=20
In the control panel, you will see a section for Cam Processors (or=20
something similar, I don't have eagle on this computer). Look in there
and=20
I'm sure you need the one that says Gerber274 (or something similar). To

generate the drill files, there should be an Excellon.cam. These are the

ones I use to run our milling maching at school, it might be different
for=20
the factory you are dealing with.=20

There are also lots of tutorials online to help you along the way.

-Tarun.





--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist