> What's going on is my client has the hex files I delivered to them. They
> are now looking at having a chip distributor program the chips for them.
> The distributor wants to know the checksums. I'd like to get the checksums
> of the actual hex files instead of recompiling, since there may have been
> minor source code changes since then (or even updates to the compiler
> which results in different optimization) which can cause a checksum to
> change.  It SEEMS I should be able get the checksum of a hex file out of
> MPLAB.

Do you have the checksum turned on in the programming window? It is a while
since I was doing some programming, but IIRC the box that comes up with the
various programming fuse options has an option there for the checksum.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist