So I have the code working. I added a WHILE function
in the "relayPlay" subroutine that only leaves the
play routine if the number goes up a.k.a. the FSR is
released, so it stays on play WHILE holding. It may
not be pretty but it works. Yippee :)

------ CODE -------
relayPlay:
	MP3Play = 1 '''Play	
 	high c2
 	pause 20 
 	low c2
 	pause 10
 	
WHILE temp < 100
	ADIN AN0,CLK,ADSETUP,temp ;keep checking A/D input
	pause 10
WEND	
	MP3Play = 1 '''sets variable back to Pause	
RETURN
---------- END CODE -----------


ANOTHER QUESION: I made my own FSR out of Velostat.
WHY do the A/D input numbers go up after each touch?
It doesn't happen with store bought FSRs.

HAND-MADE SENSOR OUTPUT:
http://beard.dialnsa.edu/~lewisa/blogs/DMSpring2005/PIC_FSR--test2.gif


///ACL

--- Alison Lewis <lewischicken@yahoo.com> wrote:

> I am working on a project in MBASIC. Anyone use that
> in this forum? I am not up to speed on any other
> language, so please respond with help on the MBASIC
> program for PIC16F Series.
> 
> Below is what the program should do:
> -----------------------------------------
> When the FSR is held down the MP3 Player should Play
> When the FSR is not being touched the MP3 Player
> should be Paused.
> -----------------------------------------
> Seems simple enough, right?
> I have good readings from the FSR 0-1023. 
> Consider any number < 100 as = touching the FSR.
> I think of it like mouseOver or mouseOut in Flash,
> but
> instead its an FSR being touched not an icon in
> Flash.
> 
> I am using a simple digital relay and sending +5
> when
> I want the pins to the MP3 player to connect. When
> the
> relay gets +5, then pauses, then goes back to ground
> it opens and shuts the relay connected to the MP3
> pins.  (very easy) 
> 
> So far I've only been able to make the FSR act like
> a
> button: release it and toggles PLAY, then the next
> release it toggles to PAUSE. Back and forth it goes
> toggling between the two options upon every release.
> 
> But how do to continuous play? By continuous play I
> mean, if it is playing AND it is being touched then
> continue playing (no toggle). Below is what I have
> done so far, BUT remember it doesn't work right it
> works like a toggle button. Am I missing some
> specific
> code or variable? Help me see how to approach this
> idea in MBasic.
> 
> Thanks, ACL



		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist