Anthony Van Herrewege wrote:
> Hm, that's not true. I do everything in Eagle and it doesn't place
> dots unless you're connecting 2 wires together (which isn't the same
> as connecting a wire to a pin).

Yes, but as I remember it, the OP had a junction of two lines right at the
opamp output.  There should be a dot where two wires and a pin connect.  I
also remember seeing a slight offset.  The lines are probably not connected
because he wasn't using the right grid when drawing the schematic.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist