On May 15, 2005, at 9:21 PM, Jonathan Hallameyer wrote:

> But if you are using a switch, then it doesnt really matter. But if
> you are using a hub, you don't want a single 10mbps device slowing
> down the entire network, right?
>
You can't connect a 10Mbps device to a 100Mbps ethernet without a switch
(or a router.)  USB appears to allow full and high speed devices on the
same network, but that's because the "usb hubs" are more akin to 
ethernet
switches...

BillW
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist