Mauricio Jancic wrote:
> Gracias Hector!
> Anyway, the HT1380 datasheet says that the logic voltage at the pins should
> be VCC+0.3V (max) and using the Diode I will get VCC + 0.7V wich, as said on
> the datasheet, can damage the chip over time...

Hmm... I'm not an expert at that but usually just some resistors on
I/O pins should prevent any dangerous currents due to this.


-- 
Hector Martin (hector@marcansoft.com)
Public Key: http://www.marcansoft.com/hector.asc

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist