Now that is a lovely PCB. Consider entering it in the free pcb contest; you
get a panel of PCBs and the board is available for others interested in
making it.

http://www.piclist.com/pcbcontest

---
James.
 
 

> -----Original Message-----
> From: piclist-bounces@mit.edu 
> [mailto:piclist-bounces@mit.edu] On Behalf Of William Chops Westfield
> Sent: 2005 May 11, Wed 23:58
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC]: ------- PCB 5 Analog Inputs -------
> 
> On May 11, 2005, at 10:47 PM, Alison Lewis wrote:
> 
> > Please follow Mr. Westfield's communication.
> 
> I made some more changes.  fiddling with others PCB designs 
> is good practice!  I moved the portc pins to make the layout 
> easier (this is one of my favorite techniques.  After all, 
> for the most part PIC IO pins can be moved around just by 
> fiddling with the firmware.  Strange that more micro 
> libraries don't have swaplevels assigned to pins. :-) Then I 
> added extra pads for future expansion.
> 
> A lot depends on how the board will be manufactured.  I like 
> to make things easy for hobbyists - single sided, wide short 
> traces.  If the board is aimed at professional fabrication, 
> some of that effort is wasted, and I'd rather spend it 
> figuring out how to get more than 10 IO pins of the 23 
> available out to connectors.  Leaving all those pins to waste 
> is just against my nature !  And ICSP/ICD would be nice.
> 
> Here's the more recent layout:
> 
> 


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist