At 09.32 2005.05.04 +0300, you wrote:
>hello,
>
>I'm experimenting with 16F628 @ 4mhz. First program is rather simple.
>All io pins are defined as outputs.
>TMR2IF emerges every 1ms and is handled in ISR (actually toggles the
>LED).
>
>So - my LED is blinking and all seems to be fine. BUT - when I take my
>breadboard and hold it on my hand, placing my finger near the PIC (from
>downside) - the blinking stops!!
>
>There is no galvanical contact - there is plastic between my finger and
>the PIC.
>
>Something weird is going on, and I would like to know what is it ;)

Try to remake all the solder joints, I can't think of anything else.


>thanks,
>Aadu Adok
>
>-- 
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist