--- Dave Turner <dave.w.turner@gmail.com> wrote:
> Hi again
> 
> On a whim, I decided to add some stuff into the
> program to turn an led
> on and off whenever the program loops.  The LED
> takes about 30 secs to
> toggle, when before it took about half a second. 
> Shouldn't it be a
> lot faster, because now I'm (supposedly) using an
> 8mhz internal osc,
> instead of the external 3MHz osc?

You've gotten a fair amount of advice (most good...)
but I haven't seen one obvious newbie error mentioned.
 Have you turned off the WDT?  My first PIC program
was "working" but had some odd behavior.  Sure enough,
the chip the WDTwas going off causing the PIC to
restart every couple of seconds. Don't know if this is
your problem but worth checking out.

Phil

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist