KY1K <ky1k@pivot.net> wrote:
> I need something that will oscillate between 55 and 65 Khz. It has to draw 
> microamps of supply current, and I prefer the control voltage range to be 
> between 1 and 3 volts.
> 
> I'd like to have a chip solution if possible.

The obvious answer, a CMOS 555, draws 100 uA typical (16 uA for the
internal divider alone).

You can probably do better by building an oscillator based on a micropower
opamp or comparator.

Also, search for low-power "voltage to frequency converters" intended for
use in remote sensors.

This sort of question will probably get better answers under the [EE] tag.

-- Dave Tweed
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist