Well, I did only compile my first "led on" program a week ago. Ok, well 2 weeks then. So, should the "INTRC" be accurate enough? Attached a zip of the entire project folder. On 5/2/05, Wouter van Ooijen wrote: > > Second, the config is all saved in the mplab project. In the > > configure menu, and the config bits part. I prefer to use this than > > specify it in the code, because it's much clearer. > > Bad idea IMHO, the source should specify everthing. But if you want it > this way you should include the project file(s) to we can check. > > > The config bits are as follows: osc is extrc-osc2 as clock out. > > You use an external RC oscillator and expect it to be accurate enough to > do serial communications? This is a bad idea, no IMHO qualification > needed. > > Wouter van Ooijen > > -- ------------------------------------------- > Van Ooijen Technische Informatica: www.voti.nl > consultancy, development, PICmicro products > docent Hogeschool van Utrecht: www.voti.nl/hvu > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist