> Second, the config is all saved in the mplab project.  In the
> configure menu, and the config bits part.  I prefer to use this than
> specify it in the code, because it's much clearer.

Bad idea IMHO, the source should specify everthing. But if you want it
this way you should include the project file(s) to we can check.

> The config bits are as follows: osc is extrc-osc2 as clock out.

You use an external RC oscillator and expect it to be accurate enough to
do serial communications? This is a bad idea, no IMHO qualification
needed.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist