> I don't know what kind of info you need... if it's just about

Need the pinouts. They differ among different models of Emerging Display.

> interfacing, then it's probably safe to assume it's HD44780
> compatible (I bought an EDTC display from allelectronics, and it
> happens that the controller chip is a 44780!). You might check
> out the datasheet from a similar module from the actual site
> (www.edtc.com).

Some pinouts are

1 - Gnd
2 - Vcc
3 - Vee
...


while some are

1 - Gnd
2 - Vee
3 - Vcc
...

I have figured out the above three but am not sure whether the rest of
the pins re same!

The red tracer on the ribbon cable that is attached to the display is
on pin 14 which surprises me!

Regards,

-- 
Chetan Bhargava
Web: http://www.bhargavaz.net
Blog: http://microz.blogspot.com

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist