Yech: an endurance spec of 100 is not very good for a soldered in prototype under development. Lets see..... At an average of 3 burn cycles per hour, 8 hours per day, you could be dead meat in about four days. Bob Ammerman RAm Systems ----- Original Message ----- From: "Olin Lathrop" To: "Microcontroller discussion list - Public." Sent: Tuesday, April 26, 2005 6:38 PM Subject: Re: [PIC]: Microchip's PIC18F87J10 > Spehro Pefhany wrote: >>> Check the endurance spec on the flash. >> >> Yes, I noticed that. Doesn't bother me much (who reprograms a >> production product more than once or twice?), but it might affect >> some applications. > > I guess I said that wrong. I meant check the retention lifetime. > > ***************************************************************** > Embed Inc, embedded system specialists in Littleton Massachusetts > (978) 742-9014, http://www.embedinc.com > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist