Good idea. I will try this.  Will any metal box do for this?

I sent the development kit back to the application engineer I have=20
contact with as requested but the support person I speak to is in=20
another place. He told he was trying to get hold of the returned kit=20
but  he never come back on that. Guess he have other things too  do and =20
is a bit fed up with all my questions now... But I still hope to=20
eventually get this info.

I very much appreciate you guys taking time trying to help.

Cheers
/Ake

Russell McMahon wrote:

>> There is one sample that light a LED on the received board when a=20
>> button is pressed in the transmitter board. Does not work here.
>>
>> Another demo is rangetest. In this demo a led is lit as long as=20
>> packets reach the received board. Always led off here.
>
>
> Suggestion:
>
> Make a screened box and try the simplest test possible with RX & TX in=20
> the box. IF that works you can suspect local interference. Even=20
> something like a steel (old technology) cake tin with a peep hole=20
> would do.
>
> Taking them somewhere else a substantial distance from where you are=20
> now and from cell sites may help as a test.
>
> Did your returned units work OK when they got them back?
>
>
>        RM
>


--=20
 ---
Ake Hedman (YAP - Yet Another Programmer)
eurosource, Brattbergav=E4gen 17, 820 50 LOS, Sweden
Phone: (46) 657 413430 Cellular: (46) 73 84 84 102
Company home: http://www.eurosource.se     =20
Kryddor/Te/Kaffe: http://www.brattberg.com
Personal homepage: http://www.eurosource.se/akhe
Automated home: http://www.vscp.org


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist