> That is I have a value in hex and i want to transmit
> it to a console but display it in decimal because
> sometimes you get control characters etc and then you
> don't see what you have unless you capture the data.
> Did that make  sense?
>
> example 0x32 = 50 and transmit a byte as "50", so need
> to convert it over and also let it splill into another
> byte if necessary.  0xFF = 02 55  so it would be
> transmitted as 02 the 55.

There are various ways of doing this "properly" or at least 
efficiently BUT I strongly suggest that you try doing it yourself 
first by whatever means you can think of as a learning exercise.

Consider brute force for a start.

__________________

If > 99
    Subtract & count 100's until < 100
    Report hundreds
else
    100's  = 0
endif

If > 9
    subtract and counts 10's until < 10
    report 10s
else
    10's = 0
endif

Remainder = 1s
Report 1's

_________________________

There are better ways of doing this, but the day you make the above 
work by yourself you will feel very pleased AND have learned several 
useful things.



        RM

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist