I have to produce a very simple circuit for my=20 client and the volume will be over 100.000 pieces probably up to 1 milion. I've tried to design with pic 10F200 and Atmel ATtiny11 but they are too expensive, the device must be very cheap, way under $0.50 What I need is a good company in China to do this for me, any contact? Regards, Octavio Nogueira Tato Equipamentos Eletr=F4nicos Ltda (11) 5506-5335 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D nogueira@tato.ind.br ICQ# 222558485 BASIC Step - O microcontrolador mais f=E1cil do mercado BASCOM - O mais poderoso compilador BASIC para ATMEL http://www.tato.ind.br ProPic tools - low cost PIC programmer and emulator http://www.propic2.com =20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=20 --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist