> > I remember reading an aritical in a trade mag several months back
> > that highlighted a problem with many ARM based MCUs. Basically
> > (IIRC) the faster parts above 50MHz are hampered by the code memory.

> In a class we use the Philips chips, they definitely run at 60 MHz
> (with the multiplier on). 

One of the points that Philips are keen to point out at 
seminars/webcasts is that their flash access is full width with zero wait 
states and their competitors aren't.

Steve.


==========================================
Steve Baldwin                          Electronic Product Design
TLA Microsystems Ltd             Microcontroller Specialists
PO Box 15-680, New Lynn                http://www.tla.co.nz
Auckland, New Zealand                     ph  +64 9 820-2221
email: steve@tla.co.nz                      fax +64 9 820-1929
=========================================



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist