> The thing is my device is too small to have a PCB DB9 female, so I was
> thinking of other types of connection. I'm only using the Rx and Tx lin=
es
> (do I need to have a cable with more than 2 wires?) so I was thinking o=
f
> a smaller connector in the device (RJ11 for example) and providing a RJ=
11
> male to DB9 female cable with my device, but I couldn't find such cable
> on mouser. Is this so out of the normal that I'll have to customize a
> cable for this application or do you know a manufacturer that makes suc=
h
> a cable (or one that uses similar small sized connector on one side of
> the cable)

Many networking/telecom products use an RJ45 as serial connector. So you
use a standard UTP patch and an adapter like:

http://www.pccables.com/01910.htm

Saludos,
					HoraPe
---
Horacio J. Pe=F1a
horape@compendium.com.ar
horape@uninet.edu

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist