Hi,

I need to connect the device I'm developing to a PC using a serial port. =
Right now, on my development board I have a PCB DB9 female, that makes =
the PC connection using a standard DB9 male - DB9 female 1-to-1 cable.

The thing is my device is too small to have a PCB DB9 female, so I was =
thinking of other types of connection. I'm only using the Rx and Tx =
lines (do I need to have a cable with more than 2 wires?) so I was =
thinking of a smaller connector in the device (RJ11 for example) and =
providing a RJ11 male to DB9 female cable with my device, but I couldn't =
find such cable on mouser. Is this so out of the normal that I'll have =
to customize a cable for this application or do you know a manufacturer =
that makes such a cable (or one that uses similar small sized connector =
on one side of the cable)

TIA

Padu
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist