That's pretty much what i've now decided to do.

I did previously get the LCD lib working (with an lcd you supplied me,
no less!), but to have to recompile the libraries to match the pin/port
configuration you're using seems a bit c**p to me.

 

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
Of Wouter van Ooijen
Sent: 15 February 2005 08:24
To: 'Microcontroller discussion list - Public.'
Subject: RE: [PIC] Bug in Microchip mcc18 std library?

> I've observed this evening that the implementation of putrsUSART in 
> the std libs is somewhat odd.

I mostly avoid using the uChip libraries. I never got the LCD lib to
work, so I wrote my own. There was some trouble with the UART lib too,
so again I wrote my own (it is not that hard to do).

So don't feel guilty about changing the lib, although you should now
regard it as 'your' lib, not a standard lib.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl consultancy, development,
PICmicro products docent Hogeschool van Utrecht: www.voti.nl/hvu
 

--
http://www.piclist.com PIC/SX FAQ & list archive View/change your
membership options at http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist