Flat side to flat side :-)
You can think of it as face-to-face if you prefer. :-)
The motor shaft goes through the holes in the center of the coils. One
coil remains stationary, fixed to the base, right in front of the
motor. The other is attached flush to the disk. These are flat coils
that are wound with increasing diameter instead of length. I will try
to take some pictures tonight.

- Ben



On Wed, 02 Feb 2005 09:16:54 +1300, Jinx <joecolquitt@clear.net.nz> wrote:
> > where
> > <---[motor] is the motor in the arm coming off the base.
> > O is a coil.
> >
> > The coils are side by side instead of one inside the other. They are
> > the flat squished up coils (voice coils?).
> 
> How do you mean "side by side" if the motor shaft goes through both ?
> 
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist