Lee McLaren wrote:

> Hi All,
>
> I am trying to get the Microchip USB Bootloader to go using my own 
> hardware, I have set up a board with a 20MHz xtal and connected up the 
> the USB socket, adjusted the config bits to enable the USB reg and all 
> looks promising, I plug it into the PC and it comes up with new 
> hardware found but when ever I point it at the drive in 
> "C:\MCHPFSUSB\Pc\MCHPUSB Driver" the system decides to use the default 
> driver from Microsoft and fails to load, I thought it may be a problem 
> with the PC so I tried a fresh system and It does exactly the same, I 
> am trying to use the MC FS Demo tool with this board and I have 
> connected up a switch to put it into the correct mode, Am I doing the 
> right thing trying to load this driver?
> Any suggestions?
>
> regards
>
>
> Lee McLaren

Its the same old MS driver problem. You reject the wrong one repeatedly 
until Windows finally accepts the right one.

--Bob

-- 
Note: To protect our network,
attachments must be sent to
attach@engineer.cotse.net .
1-866-263-5745 USA/Canada
http://beam.to/azengineer

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist