How about USB? Or mini-USB? Josh -- A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. -Douglas Adams On Fri, 28 Jan 2005 17:04:26 -0500, M. Adam Davis wrote: > I'm in the throes of product changes due to the lack of a suitable, > small connector. > > This is a sensor and display unit for a table saw. The sensor is under > 2"x2"x.5" and I need to find a suitable four conductor connector and > cable for the sensor end. I am likely to continue to use an RJ-11 for > the display. > > The cable will only need to the installed and removed a few times per > year, the primary requirements are a small flexible cable (such as those > used on computer mice), a small fairly robust connector, and a small > cost for both. The RJ-11 is too large at .5x.5.x75. > > Are there any good resources I should be looking at for these items? I > haven't found what I'm looking for at Digikey and a few other resources > - I'm hoping that in addition to some suggestions for particular > solutions I'll also get some contacts with companies I should look to > for these kinds of requests. -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist