no, the RS-232 cable.
afaik, rsr232 allows up to 15M


On Fri, 21 Jan 2005 13:07:24 -0700, Bob Axtell <engineer@cotse.net> wrote=
:
> You mean the RJ12 cable was over 2 METERS long?
> I never allow mine to be longer than 18 inches.
>=20
> --Bob
>=20
> Hern=E1n Freschi wrote:
>=20
> >seems like I found the problem. I was using a very long cable (5m). I
> >found a shorter cable (2m) and now it works.
> >
> >hjf
> >
> >On Fri, 21 Jan 2005 13:46:42 -0300, Hern=E1n Freschi <drgenio@gmail.co=
m> wrote:
> >
> >
> >>well so I now finally have communication with the ICD2. I can see the
> >>voltages and it passes the self tests. But I have a problem when
> >>trying to download the operating system. It goes on a little and then
> >>MPLAB  just exits without previous warning.
> >>Any ideas? I'm using XP SP2 on an Athlon XP 2200.
> >>
> >>hjf
> >>
> >>On Fri, 21 Jan 2005 11:47:46 -0300, Hern=E1n Freschi <drgenio@gmail.c=
om> wrote:
> >>
> >>
> >>>OK I just downloaded the firmware again, just for the heck of it. An=
d got this:
> >>>
> >>>MPLAB ICD 2 Ready
> >>>Connecting to MPLAB ICD 2
> >>>...Connected
> >>>ICD0082: Failed MPLAB ICD 2 operation
> >>>
> >>>some progress finally!
> >>>now I have to check what that error is
> >>>
> >>>hjf
> >>>
> >>>
> >>>
> >
> >
> >
>=20
> --
> Note: To protect our network,
> attachments must be sent to
> attach@engineer.cotse.net .
> 1-866-263-5745 USA/Canada
> http://beam.to/azengineer
>=20
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist