Good.  Now in MPLAB go to 'Debugger-Select Tool' and choose the ICD2. The=
n
go to 'Debugger - Download ICD2 Operating System'. Remember that in Debug
mode, the ICD2 wants to see a target PIC with power applied and an
oscillator running. In Program mode you don't need to have an oscillator =
on
the target.=20

One thing I noticed is that MPLAB doesn't remember that I am using COM1
instead of USB even though it writes the proper information to the ICD2.I=
NI
file. Very strange...

-Al

> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behal=
f
> Of Hern=E1n Freschi
> Sent: Friday, January 21, 2005 6:48 AM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC]: Free ICD issues
>=20
> OK I just downloaded the firmware again, just for the heck of it. And g=
ot
> this:
>=20
> MPLAB ICD 2 Ready
> Connecting to MPLAB ICD 2
> ...Connected
> ICD0082: Failed MPLAB ICD 2 operation
>=20
> some progress finally!
> now I have to check what that error is
>=20
> hjf
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist