On Mon, 17 Jan 2005, Robert Rolf wrote:
> How about buying another cable and slitting the conductors apart?
> Then  you can easily clip your probes to staggered stripped sections.
>
> Don Taylor wrote:
>> Is anyone aware of a tiny card with a pair of connectors on it, one
>> male and one female, that I could insert between the end of the cable
>> and the drive, so I could get access to the IDE pins and capture some
>> of the transactions with my logic analyzer?

An 80 pin cable with 3 connectors on it might be a solution.  But my
attempts, and my cable guy's attempts, at adding one of these didn't
work as well as it apparently has for some of you, and I haven't found
any source of such a cable, unlike the old days when some of the tape
drive folks provided cables with an extra connector.  Just slicing
into a cable might work but I'm trying to avoid messing up the
termination too much on this.

thanks

> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist