> The config bytes are stored at address outside the flash 
> address range, are 
> these stored in the hex file and if so does MPLAB do this for 
> you 

yes, if you specified them in your source

> or do you 
> have to add the config bytes to your assembler code and then 
> it gets added 
> to the hex that way.

yes, that's the way

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist