Hi

Another question :)

The config bytes are stored at address outside the flash address range, are 
these stored in the hex file and if so does MPLAB do this for you or do you 
have to add the config bytes to your assembler code and then it gets added 
to the hex that way.

BryanW

--
Software Engineer - Embedded Results Ltd,
http://www.kanda.com
https://www.kanda.com/stk200.html 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist