Perfect, that's what I needed to know. I wonder why the BL18Cx01.hex
file isn't named like all the other device files, with a prefix of DE.

Anyway, I'll be burning a chip with this sometime this afternoon I
think. I hope it works!

Josh
-- 
A common mistake that people make when trying to design something
completely foolproof is to underestimate the ingenuity of complete
fools.
        -Douglas Adams

On Wed, 05 Jan 2005 09:14:32 -0700, Robert Rolf <Robert.Rolf@ualberta.ca> wrote:
> You need both.
> BL0010101 is the bootloader for the ICD2 and communicates
> with MPLab.
> MPLAB will load BL18Cx01 if that device is chosen
> as target, or some other, appropriate to the chosen target.
> R
> 
> Josh Koffman wrote:
> > Hi all. I whipped up an ICD2 clone (described here
> > http://home.t-online.de/home/520054661375/stolz.de.be/icd/main.html).
> > Now I'm ready to load the firmware into the 16f876, but I'm not sure
> > if I use BL18CX01.hex or BL010101.hex (in the MPLAB\ICD2 directory of
> > MPLAB 7).
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist