Harold Hallikainen wrote:

>I'm working on a project using the PIC UART (being driven by a Silicon
>Systems USB to UART bridge). I'm sending binary commands to the PIC. I'm
>trying to test it using a Windows terminal emulation program (I've tried
>Terra Term and HyperTerm) using the ALT-NNN sequence to send non-ASCII
>codes. It seems to work for codes higher than 0 and lower than 128. But,
>it does not work for codes of 0 or 128 and up. I just tried hanging a
>scope on COM2 and using both terminal programs. Hold down ALT, hit numeric
>key 1, release ALT. I see it on the scope. Hold down ATL, hit numeric key
>0, release ATL, nothing on the scope. Anyone know how to get full 8 bit
>codes out of a Windows terminal, or can suggest a terminal emulator that
>WILL let me send 8 bit binary codes?
>
>
>THANKS!!!!!
>
>Harold
>
>
>  
>
Maybe you are sending just 7-bits...?

--Bob

-- 
Note: Attachments must be sent to
 attach@engineer.cotse.net, and 
 MAY delay replies to this message.
        520-219-2363

_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist