Ralph Seguin wrote :

> Configuration:
> PIC16F88-I/P...
> ICPROG 1.05C,  configured for... 16F84A

> Firstly, a number of constants don't seem to be defined
> (_WRT_ENABLE_OFF is not defined,...


Well, what did you expect ?
You are using a F88 but are pretending it is an old F84.
That will of course not work.

> Anybody have a reasonable config value or list for this MCU?

Doesn't help a bit, as long you are not using tools that specificaly
supports the PIC you actualy are using.

> Anybody have a working program and/or MPLAB project to blink the LED
> (connected to RA2 on the Olimex PG4-D board) for the 16F88-I/P?

That would probably not help either, since you can't program
the F88 with your (current) tools anyway.

Regards,
Jan-Erik.



_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist