Jan-Erik Soderholm wrote:
> The "PIC10F200/202/204/206, Memory Programming
> Specification", document DS41228D says :
>
> "Note: By convention the Configuration Word
>  register is stored at the logical address
>  location of 0xFFF within the hex file generated
>  for the PIC10F200/202/204/206. This
>  logical address location may not reflect the
>  actual physical address for the part itself.
>  It is the responsibility of the programming
>  software to retrieve the Configuration
>  Word register from the logical address
>  within the hex file and translate the
>  address to the proper physical location
>  when programming."

What section is this in?  I've been using DS41228C and don't remember
anything like that.  I wonder if this was added as a "fix" to getting the
address wrong.  I hope this isn't the final answer, because it's a bad
design and requires special case checks in programming software.  Yuck.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com
_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist