Hi Cristian,

         All it=B4s ok, only inverted. This scope comes from maintenance=20
recently, so I supect the vertical deflector is inverted by mistake. May =
be=20
it=B4s only change two wires. I just download the manuals and schematics =
and=20
will study them.

thanks for help

Rubens

At 19:48 28/11/2004, you wrote:
> >          No, it=B4s not pressed. And this control only works for chan=
nel 2.
> > If I press it, then I have the correct line, only in channel 2.
>Hmmm... if you find out what's wrong please tell us...
>Maybe the vertical deflector is inverted???
>Or you have a very low vertical position for CH.1. If you connect the=20
>probe to ground, is the trace in the center? maybe it's below the screen=
=20
>view (don't know if that's possible). Or your probe is weird?
>
>Christian
>
>
>_______________________________________________
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist


_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist