Hi !
Regarding the issue of the addresses put into the HEX
files for the config word for the 10F's...

FWIW,
I just built my "beta" of my 10F application
using MPLAB 6.60, relocatable code using the
builtin 10F202.LKR file as-supplied, and using Olins
data directive instead of __CONFIG. Now, I'm no
expert in reading HEX files (they are just "temp"
files for me :-) ), so could anyone see if the adresses
in the HEX file below are correct ?

And, Olin, are you sying that the following
entry in the 10F202.LKR file is incorrect ?

CODEPAGE   NAME=.config  START=0xFFF   END=0xFFF     PROTECTED

That is, it should be "START=0x3FF   END=0x3FF" !?

All four LKR files (200/202/204/206) have "0xFFF" at that line.

Best Regards, and thanks,
Jan-Erik.

My HEX file :

:020000040000FA
:100000002500000B010C280008022A000B060A0A32
:1000100006040B0A0605020C2509EA020B0A09026E
:100020002A000B06150A0605160A0604020C250905
:10003000EA02160AA802E902040A0B06210A0604CB
:10004000220A0605000800000008210061020102E2
:060050004307270A000827
:040056000008000896
:100200000E0C0600C20C02006C0C29000B05020942
:1002100023096C0C29000B0402096C0C29000B0546
:10022000020923096C0C29000B0402096C0C29003B
:100230000B05020923096C0C29000B040209040BAD
:02024000200B91
:021FFE00EB0FE7
:00000001FF

_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist