----- Original Message ----- 
From: "Ken Pergola" <no_spam@localnet.com>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Tuesday, November 23, 2004 6:53 PM
Subject: RE: [EE]: 12C508A with Xtal Won't Oscillate


>
> Hi Ed,
>
> I just tried this project and I'm getting it to work with a 
> PIC12C508-JW --  even when flashing a penlight into the quartz window for 
> kicks.

I don't suppose that using the "A" version will make a difference?

> Just for kicks, try using the attached HEX file: MM5369.HEX .  I zipped it 
> up for you. This is the HEX file I just programmed into the PIC  and it 
> works.
>
> Also, what is the checksum you get when you assemble the project in MPLAB 
> IDE?
>
> I'm getting 0xF671 with MPLAB IDE v6.62.
>
> 1) Please post the checksum you are getting in MPLAB IDE when you assemble 
> the project.

I was using the quick build option and didn't notice a checksum in any of 
the windows.... Of course I wasn't looking for a check sum either.....

> 2) Let us know if the attached HEX file works for you.

Thank you, I shall. ;-)
>
>
> Best regards,
>
> Ken Pergola
>
>
>
>


--------------------------------------------------------------------------------


> _______________________________________________
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 

_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist