> If you are the DIY type person, you can use the Davit Tait programmer
> and interface it to an 8 pin SOIC test clip (ie from www.mouser.com).
> The clip is $11 so the whole thing will probably run you < $20. I used
> a modular connector and some CAT 5 to interface the clip w/ the
> programmer.

I've done that. I had a project that required me to program about 100 SOIC
16f629s, I just used a piece of ribbon cable, a dip-ic header and soldered
the other end to a SOIC test clip, plugged it into my PICKIT1 and voila -
instant ICSP.

-Denny


_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist