In message <004f01c4ca9b$f6a7cbf0$0300a8c0@main>
          olin_piclist@embedinc.com (Olin Lathrop) wrote:

> I think Wouter is using a 16F628, for which the 16F648A is a pin-compatible
> replacement with twice the code space.  I've never see the the schematic to
> a Wisp, but it's probably not that hard at all to adapt the EasyProg code to
> run on a 16F648A in a Wisp.  You will have to support a few of the newer
> commands to get to spec version 10 where you don't have to do variable Vdd.

The firmware pack from embedinc.com (install_picprg_dev.exe) seems to be
missing a file - lookinc.ins.aspic. This seems to be preventing the firmware
from compiling successfully (loads of standard symbols, e.g. STATUS and
INTCON are shown as undeclared by MPLAB).
This may well be down to my lack of understanding of the build environment,
though...

Later.
-- 
Phil.                              | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem@philpem.me.uk              | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.me.uk/          | 48xCD, ARCINv6c IDE, SCSI
... 'Daddy, what does Format C: mean?'
_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist