> I am not familiar with the PC software you use
Its mentioned on the Wisp628 page on your website.

> - are you sure you are using a 0-modem cable?
Yes.

> - are you using the correct port? try shorting pins 2 and 3 of the 
> cable (without the Wisp628 connected), use a terminal program (or 
> xwisp term 19k2 :) ) to see whether you get an echo. Then remove the 
> short to check that the echo is realy caused by the short.
Checked... Correct port and got an echo. Used Bray's Terminal freeware.

> - is the PIC in the Wisp628 running? The wisp628 page
> explains how you can connect a LED to check this.
I mentioned this in the first post. The Wisp628 works fine, the LED
flashes twice when connected.

Thanks,
Mohit.

_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist