On Tue, 19 Oct 2004, Lee Jones wrote:

> Plug the wire from sparkplug in cyliner #1 into your chosen TDC
> tower in distributor.
>
> Following the firing order, plug a wire into the next tower (in
> rotation order) and then connect the other end of that wire to
> the proper sparkplug.
>
> Repeat until all sparkplus & wires are hooked up.

Er, the firing order is not 1-2-3-4 normally, it's 1-3-2-4 or such and it 
depends on the engine!!!. Be careful ;-) If you have more than 4 cylinders 
the firing order gets complicated (there can be several combinations). Get 
a manual or 'consult' another car of the same type if in doubt.

Peter
_______________________________________________
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist