Newbie,

While on the subject of RS232. I have a micro controller for my turbine =
engine. It has it's own interface (LCD) for programming, but can be =
connected to the pc via a rs232 adapter. The manual says to use a " =
standard RS232 adapter " so I made up 1 using a max232, (DB9 - RJ45). =
Ran the software supplied, but still no communication. Tried changing =
baud rates still nothing.

My question is just how "standard" is standard? by that I mean r there =
other pin configurations?=20

Dave Smith
Cape Town
South Africa

  ----- Original Message -----=20
  From: Mr.Pink bedak=20
  To: piclist@mit.edu=20
  Sent: Friday, October 15, 2004 5:12 AM
  Subject: [pic]-Interface pic16f84a with rs232


  Hi...
  Im working on with my project and got stuck.i want my
  output from pic16f84a to be feed to Computer using
  rs232.I have already check the internet about  that
  and stiil confuse.Some of solution says=20
  -1-that in order to interface pic16f84a  with rs232=20
  MUST have MAX 232
  -2-there is no need of MAX232.

  Problem -How can i interface pic16f84a with com via
  rs232.
  thanks

  Find local movie times and trailers on Yahoo! Movies.
  http://au.movies.yahoo.com
  _______________________________________________
  http://www.piclist.com
  View/change your membership options at
  http://mailman.mit.edu/mailman/listinfo/piclist

_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist